BS EN 12735-1-2001
|
ID： |
44F5EFD20D9549478CCB2052C95C5D7E |
|
文件大小(MB)： |
0.37 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2013-6-23 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,12735-1:2001,Incorporating,Amendment No. 1,Copper and copper,alloys — Seamless,round copper tubes for,air-conditioning and,refrigeration —,Part 1: Tubes for piping systems,The European Standard EN 12735-1:2001, with the incorporation of,amendment A1:2005, has the status of a British Standard,ICS 77.150.30; 91.140.30, , , ,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Nov 05 00:55:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 12735-1:2001,This British Standard was,published under the authority,of the Standards Committee,and comes into effect,on 15 June 2001,. BSI 2006,ISBN 0 580 37091 7,National foreword,This British Standard was published by BSI. It is the UK implementation of,EN 12735-1:2001, incorporating amendment A1:2005.,The start and finish of text introduced or altered by amendment is indicated in,the text by tags !". Tags indicating changes to CEN text carry the number,of the CEN amendment. For example, text altered by CEN amendment,A1:200X is indicated by !".,The UK participation in its preparation was entrusted by Technical Committee,NFE/34, Copper and copper alloys, to Subcommittee NFE/34/1, Wrought and,unwrought copper and copper alloys.,A list of organizations represented on NFE/34/1 can be obtained on request to,its secretary.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity from,legal obligations.,Amendments issued since publication,Amd. No. Date Comments,16627 29 September 2006 See national foreword,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Nov 05 00:55:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 12735-1,April 2001,ICS 23.040.15,English version,Copper and copper alloys — Seamless, round copper tubes for,air-conditioning and refrigeration — Part 1: Tubes for,piping systems,Cuivre et alliages de cuivre — Tubes ronds sans soudure,en cuivre pour l'air conditionné et la réfrigération —,Partie 1: Tubes pour canalisations,Kupfer und Kupferlegierungen — Nahtlose Rundrohre aus,Kupfer für die K鋖te- und Klimatechnik — Teil 1: Rohre für,Leitungssysteme,This European Standard was approved by CEN on 6 March 2001.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2001 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 12735-1:2001 E,+ A1,April 2005,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Nov 05 00:55:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,Page 2,EN 12735-1:2001,. BSI 2006,Contents,Page Page,Foreword .. 3,Introduction 4,1 Scope 4,2 Normative references . 4,3 Terms and definitions 4,4 Designations 5,4.1 Material . 5,4.2 Temper . 5,4.3 Product . 5,5 Ordering information . 6,6 Requirements . 6,6.1 Composition 6,6.2 Mechanical properties .. 7,6.3 Dimensions and tolerances 7,6.4 Drift expanding . 10,6.5 Surface quality .. 10,6.6 Freedom from defects .. 10,7 Sampling 10,8 Test methods .. 10,8.1 Analysis 10,8.2 Tensile test . 10,8.3 Hardness test . 10,8.4 Drift expanding test . 11,8.5 Residue test.. 11,8.6 Eddy current test .. 11,8.7 Retests .. 11,9 Declaration of conformity and,inspection documentation .. 12,9.1 Declaration of conformity . 12,9.2 Inspection documentation 12,10 Packaging, marking and form of,delivery 12,10.1 Packaging and marking 12,10.2 Form of delivery 12,Bibliography 14,Annex ZA (informative) Relationship be……
……